Transformer substations UZTT KTP-TV, KTP-TK, KTP-PV, etc.

Purpose: complete transformer substations of kiosk type (KTP) outdoor installation for cable and overhead networks, designed for receiving, transit, conversion and distribution of electrical energy of three-phase alternating current with a voltage of 6-10 / 0.4 kV with a frequency of 50 Hz.
KTP are used for power supply of industrial facilities, agriculture, municipal consumers and small settlements, construction projects, mining, oil and gas enterprises and other facilities.

The reduced OPTIMA KTP is designed for power supply to agricultural consumers, individual settlements and small industrial facilities in areas with a temperate climate (from - 45 ° C to + 45 ° C).

KTP are used for power supply of industrial facilities, agriculture, municipal consumers and small settlements, construction projects, mining, oil and gas enterprises and other facilities.

Single-phase KTP-VS are used to supply farms, horticultural plots, settlements and other agricultural consumers with a single-phase voltage of 0.23 kV. Three-phase KTP-VS (KTP-MTP) are used to supply agricultural consumers, individual settlements, small industrial facilities and other consumers with a three-phase voltage of 0.4 kV.

Complete mast transformer substation of a dead-end type of outdoor installation with a capacity of 25, 40, 63, 100, 160, 250 kVA, with a voltage of 10(6) 0.4 kV, with an air input on the high voltage side, with a cable or air output on the low voltage side, is intended for receiving electricity.

PKTP are used for power supply by three-phase current to electric receivers of coal, ore and other sections (quarries) conducting open-pit mining, temporary facilities.

Complete transformer substations with service corridors in a metal shell with a capacity of 250-1000 kVA are designed to receive electrical energy of three-phase alternating current of frequency 50 Hz with a voltage of 6 or 10 kV, convert into electrical energy of 0.4 kV and supply consumers with it.

Complete transformer substations of railway KTPZH are used for receiving, converting electrical energy of three-phase AC networks, with a frequency of 50 Hz and a voltage of 27.5 kV, to a value of 0.4 kV, and its distribution between non-traction consumers, which include sidings, crossings, stopping points used on railway tracks.

KTP TO with a capacity of 80 kVA with a voltage of 380 / 55-95V is designed for heating concrete in winter, with the regulation of the temperature of concrete heating in manual or automatic mode.

Complete transformer substations of an internal installation with a capacity from 250 to 2500 kVA with a voltage of 6 (10) kV are designed to receive subsequent conversion and further distribution of electricity.

• Measurement of signals on analog inputs.
• Determination of the state of discrete inputs.
• Conversion to physical quantities.
• Generation of control or alarm output signals.
• Performing additional calculations to implement the required control algorithm.
• Archiving.
• Exchange via RS-232 and CAN interfaces, including with other modules.
• Indication on the display, correction of settings from the front panel, manual control mode.

• Transformer substations. Technical specifications.

Price list