Power transformers UZTT TM, TMZ, TMG, TMF, TMB, etc.

The VN and NN inputs are located on the lid. TM transformer tanks are rectangular in shape. Radiators are used to increase the cooling surface.

Transformer tanks are welded, rectangular in shape, filled with transformer oil. Radiators are used to increase the cooling surface. In the lower part of the tank wall there is a plug for oil drain, a tap (plug) for sampling, a grounding bolt.

TMG transformer tanks are rectangular in shape without an oil expander. Hooks located under the upper frame of the tank are used to lift the tank and transformer assembly. On the tank lid there is a tap (plug) for oil filling, at the bottom of the tank there is a plug for oil drain, a tap (plug) for sampling, a grounding bolt. The VN and NN inputs are located on the lid.

Transformer tanks are rectangular. On the narrow opposite walls of the tank there are inlets that are closed with boxes with seals. The oil level is monitored visually by the oil level indicator, which is located on the tank wall in TMGF transformers and on the end of the oil expander in TMF transformers.

TMB transformers are designed to power the electrical equipment of drilling rigs. TME transformers are installed on excavator platforms to power electrical equipment.

Three-phase oil transformers of the TMPN, TMPNG series with a primary voltage of 0.38 kV are designed to power submersible electric pumps for oil production.

TMTO-80/0,38-U1 transformers are designed for heat treatment of concrete and soil, power tools and temporary lighting.

Transformers are designed to convert electrical energy in three-phase alternating current power grids with a frequency of 50 Hz and are installed in industrial premises and public buildings, which are subject to increased requirements in terms of fire safety, explosion protection, environmental cleanliness.

Power oil step-down three-phase two-winding transformers with a capacity from 25 to 630 kVA for powering electrical equipment of railways electrified with alternating current.

Transformers power oil step-down three-phase two-winding general purpose.

Stationary power oil transformers TMN lowering general purpose rated power from 2500 to 6300 kVA voltage up to 35 kV with regulation under load (RPN) are designed for the needs of the national economy. Transformers are suitable for indoor and outdoor installation.

A three-phase two-winding oil power transformer of the TRDN-25000/110 U1 type is designed to convert AC electrical energy of 110 kV voltage class into electrical energy of voltage class 6 or 10 kV of low voltage.

• Power transformers. Technical specifications.

Price list